Angelcare ACAM1 Manual Del Usuario página 5

PAIRING YOUR ADDITIONAL NURSERY UNIT
1. Turn ON the Parent Unit and keep the additional
Nursery Unit OFF
2. Go to General setting menu.
3. Go to the Pairing Menu
4. In the Pairing Menu, select Nursery Unit 2 Icon
5. The Linking Icon
6. Turn ON the Nursery Unit 2 (the additional
Nursery Unit) and press and hold its "pause/
pairing" button until the power LED (AC327 &
AC320) or temperature indicator (AC337 &
AC527) starts flashing while pairing
7. If the connection has been made, the Green
Successful Pairing Icon
screen and the menu will show the OK Paired
Icon
8. Otherwise, the Red Failed Pairing Icon
appear on the screen. You will need to try again
IMPORTANT
SWITCH NURSERY UNIT VIEW AND BROADCASTING SOUND
With more than one Nursery Unit you can view each Nursery Unit individually or use the split
screen mode
ON MODEL AC337, AC327 & AC320
1. Press the View Mode button on the Parent Unit
2. Select the preferred Nursery Unit or the split view
• In split view, you can change the broadcasting
Nursery Unit sound with the Switch Nursery Unit
sound button of the Parent Unit
ON MODEL AC527
1. Press the View Mode button on the first menu
2. Select the preferred Nursery Unit or the split view
will appear on the screen
will appear on the
will
• To customise the settings of your additional Nursery Unit, make sure the
CAM2 is selected and broadcasting sound
• When using two Nursery Units you will only be able to hear audio from
one Nursery Unit at a time (Nursery Unit sound transmitted is highlighted
in the info bar). In split screen, the sound transmitted from the Nursery
Unit will be indicated on the screen by a speaker icon shown to the right
of the CAM icons
3
VOX
4
6
E
N
5