Festo CDSA-D1-VX Manual De Usuario página 19

3.4 CAMF−B−M25−G4 jumper plug
It is possible to control the CMXR multi−axis controller
using an external controller. The handheld operator unit is
not absolutely required for such operation. The handheld
operator unit can be disconnected after the programming
and commissioning work. Because the signals for
EMERGENCY STOP are transmitted via the operator unit,
after it is disconnected it is necessary to jumper the
signals. This is done using the CAMF−B jumper plug.
3
2
1
CAMI−C interface unit
2
CAMF−B jumper plug
20
3
NESC−C connecting cable
Festo GDSP−CDSA−SY−ML 0912a English
1