Festo CDSA-D1-VX Manual De Usuario página 22

5 On−site diagnostics
5.1 On−site diagnosis with LED
The current state of the CMXR multi−axis controller can be
determined via the status LEDs on the CDSA operator unit.
LED
Run (green)
Error (red)
Motion (green)
Process ( )
5.2 On−site diagnosis with display
When an error is active (error LED lights up), the error text
is displayed in the header of the handheld operator unit.
For detailed information about the reporting system,
please refer to the CMXR programming instructions
GDCP−CMXR−SW.
Festo GDSP−CDSA−SY−ML 0912a English
Description
Communication connection to the CMXR−C1 exists
An error message is active that has to be
acknowledged
Drives are under control
Not used at present
23