Technical Data; Filtering And Lubrication Requirements - Truper TPN-886H-2 Manual Del Usuario

Technical Data

Impact Mechanism
Square Impeller
Maximum Torque
Weight without Accessories
Air Consumption
Air Input Connection
Hose Inner Diameter
Please consider the increase in pressure in the line or the hose inner diameter to compensate
CAUTION
the use of too long hoses (more than 26.2 ft). The hose minimum inner diameter shall be 3/8" and the
connectors shall be 1/4 NPT. Use the right size and good quality couplers and accessories.

Filtering and Lubrication Requirements

CAUTION Dust, water and lack of oil specific for pneumatic tools are the main cause of potential malfunction of the tool.
Setting up a
lubrication reducing oil consumption 80% increasing significantly the quality of air the operator is breathing.
Air
Compressor
Code
Description
Air Release
Free Speed
Air Pressure
Brand UNI-LL-1/4 centralized filter-oiler system is recommended. This system ensures
UNI-LL-1/4
Centralized
Filter-Oiler
• The filter oiler system shall
be regulated to supply 3 to
6 drops per minute.
TPN-886H-2
Air Impact Ratchet
Rocking Dog
68 Nm (50 lb-ft)
Head on
150 RPM
1/4 NPT
System
Air Hose
11189
1/2"
2,5 lb
90 PSI
3 CFM
3/8"
Quick
connector
(not included).
• Drain water from the air
compressor tank as well as
condensation in the hoses
before using the tool. See
the compressor
instructions.
ENGLISH
3