Technical Data; Filtering And Lubrication Requirements - Truper TPN-776X-2 Manual

Technical Data

Impact Mechanism
Maximum Torque
Weight Without Accessories
Air Consumption
Air Inlet Connection
Hose Inside Diameter
Please consider the increase in pressure in the line or the hose inner diameter to compensate
CAUTION
the use of too long hoses (more than 314.96 inches). The hose minimum inner diameter shall be 1/2" and the
connectors shall be 3/8 NPT. Use the right size and good quality couplers and accessories.

Filtering and Lubrication Requirements

CAUTION Dust, water and lack of oil specific for pneumatic tools are the main cause of potential malfunction of the tool.
Setting up a
lubrication reducing oil consumption 80% increasing significantly the quality of air the operator is breathing.
Air
Compressor
Code
Description
Box Impeller
Air Ejection
Free Speed
Air Pressure
Brand UNI-LL-1/4 centralized filter-oiler system is recommended. This system ensures
UNI-LL-1/4
Centralized
Filter-Oiler
• The filter oiler system shall
be regulated to supply 3 to
6 drops per minute.
TPN-776X-2
Air impact wrench
Twin Hammer
1 018 Nm (750 lb-ft)
Front and Bottom
6 000 RPM
3/8" NPT
Quick
connector
(not included).
System
Air Hose
16889
3/4"
9.5 lb
90 PSI
6 CFM
1/2"
• Drain water from the air
compressor tank as well as
condensation in the hoses
before using the tool. See
the compressor
instructions.
ENGLISH
3