Technical Data; Filtering And Lubrication Requirements - Truper TPN-734H-2K Manual

Technical Data

Impact Mechanism
Screws Capacity
Maximum Torque
Weight Without Accessories
Air Consumption
Air Inlet Connection
Hose Inside Diameter
CAUTION
Please consider the increase in pressure in the line or the hose inside diameter to compensate the use
of too long hoses (more than 26.2 ft). The hose minimum inside diameter shall be 3 / 8" and the connectors shall be
1 / 4 NPT. Use the right size and good quality couplers and accessories.

Filtering and Lubrication Requirements

CAUTION Dust, water and lack of oil specific for pneumatic tools are the main cause of potential malfunction of the tool.
Setting up a
lubrication reducing oil consumption 80% increasing significantly the quality of air the operator is breathing.
Air
Compressor
Code
Description
Box Impeller
Air Ejection
Noise Level
Vibration
Free speed
Total Length
Air Pressure
Brand UNI-LL-1/4 centralized filter-oiler system is recommended. This system ensures
UNI-LL-1/4
Centralized
Filter-Oiler
The filter oiler system shall
be regulated to supply 3 to
6 drops per minute.
TPN-734H-2K
Air impact wrench kit
Twin Hammer
400 lb-ft
Head on
> 2.5 m/s
7000 RPM
4.4 CFM
1/4" NPT
System
Air Hose
18281
1/2"
3/4"
115 dB
2
5.7 lb
6-1/2"
90 PSI
3/8"
• Drain water from the air
compressor tank as well as
condensation in the hoses
before using the tool. See
the compressor
instructions.
ENGLISH
3