Tabla de contenido
Publicidad
2.5 mm
adhesive strips
bandes adhésives
tiras adhesivas
red
rouge
rojo
6
English
Note:
To prevent shipping damage, the spout is
attached to the spout escutcheon with two
adhesive strips.
Remove the strips before installing the spout.
Installation
For proper operation of the faucet, the hot
supply must be on the left, and the cold supply
must be on the right.
Remove the valve mounting nuts from the
valves.
Push the valves up into the holes. Install the
mounting nuts on the valves.
Tighten the tensioning screws.
Publicidad
Tabla de contenido
