Electronic Circuit Board Layout; Technical Specifi Cations - SOMFY FX24 Manual De Instalación

Electronic circuit board layout

Key:
Preset value
Increment/decrement parameters or
switch ON/OFF
Back/Validate
Scroll the menu
Technical specifi cations
Electronic controller
Power supply
Mains/low voltage insulation
Operating temperature
Motor output current level
Motor relay communication current
Max. motor power
Accessory power supply
Gate open indicator
Blinking light
Battery (ref. 9014611)
Charge voltage
Charge current
Battery capacity
Flat battery protection threshold
Battery recharge time
FX24 is supplied with standard settings entered.
The electronic circuit board is provided with an unpluggable terminal block to facilitate maintenance. It is supplied with a
series of ready wired jumpers to facilitate installation.
4
Simultaneously pressing the + and - buttons
is used to exit the menu and return to the
previous menu.
From the main menu level, simultaneously
pressing the + and – buttons will exit the
programming mode.
The display is switched off.
Programming in progress
Error in the value or function
Enter the value or function
230 V AC ± 10% - 50 Hz
> 2 M Ω 500 V DC
-10 / +55°C
3.5 A + 3.5 A max.
10 A
40 W (24 V DC)
24 V AC
NO contact (24 V AC - 1 A max.)
24 V AC - 25 W max.
27.2 V DC
130 mA
2 x (12 V 1.2 Ah)
20.4 V DC
12 to 14 hours
Copyright © 2008 Somfy SAS. All rights reserved.