Printing; Printing Images At The Printer's Standard Settings [Easy Print] - Olympus STYLUS TOUGH-8000 Basic Manual

Printing

Direct printing (PictBridge
By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
To fi nd out if your printer supports PictBridge,
refer to the printer's instruction manual.
*1
PictBridge is a standard for connecting digital
cameras and printers of different makers and
printing out pictures directly.
The printing modes, paper sizes, and other
parameters that can be set with the camera
vary depending on the printer that is used.
For details, refer to the printer's instruction
manual.
For details on the available paper types,
loading paper, and installing ink cassettes,
refer to the printer's instruction manual.
Printing images at the
printer's standard settings
[EASY PRINT]
1
Display the image to be printed on
the monitor.
"Viewing images" (p. 17)
Printing can also be started when the
camera is turned off. After performing Step
2, use EF to select [EASY PRINT], press
the o button. Use GH to select an image,
and press the o button.
2
)
*1
Turn on the printer, and then
connect the printer and camera.
H button
Multi-connector
USB cable (supplied)
3
Press H to start printing.
4
To print another image, use GH
to select an image, and press the
o button.
To exit printing
After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.
Connector cover
EASY PRINT START
PC / CUSTOM PRINT
OK
EXIT PRINT OK
17
EN