Making And Answering Calls - Bose A20 Guia Del Usuario

Using the Headset

Making and answering calls

Call activity
To make a call
To activate voice control
(if available)
To answer a call
To end a call
To ignore an incoming call
To redial the last number
To transfer the audio to
the mobile phone
Note: Some functions may not be available for some devices. Refer to your device
user's guide for further details.
Note: If you are on a call and unplugged from the intercom, the headset will allow
you to complete your call, then it will turn off approximately three seconds
after the call is terminated. To use the headset when unplugged from
the intercom (to listen to secondary audio sources or to make or receive
calls), we recommend you disable the Auto Off feature for uninterrupted
functionality. See "Auto Off" on page 12.
22 - English
What to do
Dial from your connected phone. The call will automatically
transfer to the headset.
When there are no active or incoming calls, briefly press
Briefly press . You should hear a short beep in the headset
before you hear the incoming call.
Briefly press . You should hear two short beeps in the
headset to indicate that the call has been ended.
Press for one second.
When there are no active or incoming calls, press
quick succession.
When you are on a call, press
This transfers the audio to the mobile phone handset while the
Bluetooth ® connection remains active.
twice in
for three to four seconds.
.