Secondary Audio Modes; Secondary Audio Mode Selector - Bose A20 Guia Del Usuario

Using the Headset

Secondary audio modes

If you have connected one or more secondary audio sources to the headset, you
must decide how you want to hear those secondary sources.
To select how you will hear your secondary audio sources, use the Secondary
Audio Mode selector on the control module.

Secondary Audio Mode selector

The selector has three positions: MUTE, MIX and OFF.
Position Function
MUTE Intercom prioritized
over any secondary
audio sources
MIX Intercom mixed with
any secondary audio
sources
OFF Intercom only
Note: In OFF mode,
Note: Only one secondary source can be heard at a time. Audio from a secondary
source will never override intercom communications.
Note: Incoming and outgoing phone calls automatically mute all other secondary
audio sources (when the Secondary Audio Mode selector is in either the
MUTE or MIX position). During a Bluetooth phone call, the intercom and the
phone call will be heard as mixed.
24 - English
Description
If an intercom signal is detected, all
secondary audio sources are temporarily
muted. Secondary audio will return after
intercom audio ceases.
Also see "Managing multiple secondary
sources" on page 25.
All secondary audio sources are mixed
with the intercom audio. (Audio from a
connected device will keep playing during
intercom communications).
Note: In MIX mode, you will hear a
maximum of two audio sources – the
intercom plus one secondary source.
Also see "Managing multiple secondary
sources" on page 25.
Only intercom audio is active. All secondary
audio sources are off.
Note: If you switch to OFF mode while
Bluetooth
®
connected to a Bluetooth source,
power is
you many need to re-establish your
disconnected,
Bluetooth connection the next time
and all
you turn on the headset.
antennae are
disabled.