Changing Background (Background); Changing Sound Meter (Sound Meter); Changing Slide Show On/Off (Slide Show) - Eclipse CD5100 Manual Del Propietário

Various Settings
Changing Background
(Background)
You can change the background.
Press the [SELECT] (Upper/Lower)
1
button to select the Background.
2
Press the [ENTER] button.
The back ground setting mode is
activated.
Press the [SELECT] (Upper/Lower)
3
button to select the setting item.
When the button is pressed, the
background changes in the following
order.
Motion picture 1 ↔ Motion picture 2 ↔
Wall paper 1 ↔ Wall paper 2 ↔
Wall paper 3 ↔ Wall paper 4 ↔
Standard (Background OFF) ↔
Motion picture 1 ↔
4
Press the [ENTER] button.
The selected settings will take effect.
Press the [CUSTOM/MENU]
5
[RTN] button
adjustment mode.
Changing sound meter
(Sound Meter)
You can change the sound meter type.
Press the [SELECT] (Upper/Lower)
1
button to select the Sound Meter.
2
Press the [ENTER] button.
The sound meter type setting mode is
activated.
52
or
to exit display
Press the [SELECT] (Upper/Lower)
3
button to select the setting item.
When the button is pressed, the
analyzer type changes in the following
order.
Type 1 ↔ Type 2
4
Press the [ENTER] button.
The selected settings will take effect.
Press the [CUSTOM/MENU]
5
[RTN] button
adjustment mode.
Changing Slide Show ON/OFF
(Slide show)
Slide Show can be switched ON or OFF. When
Slide Show is switched ON and "Slide Show" is
selected in the screen settings, the main unit will
display a series of previously-stored images (see
page 19).
Press the [SELECT] (Upper/Lower)
1
button to select the Slide show.
2
Press the [CUSTOM/MENU] button.
The slide show setting mode is
activated.
Press the [SELECT] (Upper/Lower)
3
button to select the setting item.
When the button is pressed, the slide
show setting changes in the following
order.
Upper: ON
Lower: OFF
Press the [CUSTOM/MENU]
4
[RTN] button
adjustment mode.
or
to exit display
or
to exit display