INTRODUCTION
Dear Customer,
Thank you for buying the Pellenc FIXION tyer. Correctly used and maintained, this tool will give a
satisfactory performance for years to come.
ENVIRONMENTAL PROTECTION
Your equipment comprises numerous materials which can be valorised or recycled.
Entrust these to your reseller or to an approved service centre so that they can be
processed.
Comply with the regulations in force in your country as concerns environmental protection
associated with your activity.
SAFETY INSTRUCTIONS
You must read THE WHOLE of this user guide before using the tool or before carrying out
servicing operations.
Comply scrupulously with the instructions and illustrations given in this document.
All through this user guide you will find advisory notes and information entitled: REMARK, CAUTION /
WARNING.
A REMARK provides additional information, clarifies a point or explains a step to be followed in detail.
The CAUTION and WARNING advisories are used to define a procedure which, if neglected or incorrectly
performed, may lead to serious damage to the equipment and/or personal injury.
G
This advisory:
indicates that if the procedures or instructions are not complied with, any damage will not
be covered by the warranty and the owner will be responsible for the repair costs.
Safety indications are also given on the tool; they remind you of the safety precautions to be taken. Identify
and read these indications before using the tool. Immediately replace any indications that may become
partially illegible or deteriorated.
Refer to the «SAFETY INDICATIONS» heading in order to identify the location of the safety
indications on the tool.
No part of this manual may be reproduced without the written consent of PELLENC. The technical
characteristics and the illustrations given in this manual are for information purposes and are in no way
contractual. PELLENC reserves the right to make any modification or improvement to its products as
deemed necessary without informing customers already in possession of a similar model. This manual
forms an integral part of the tool and must accompany the tool if it changes hands.
3