Abicor Binzel ABIMIG XX0 Instructivo De Servicio página 18

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Emergency information
3 Product description
3.1 Technical Data
3.2 Signs and symbols used
4 Configuration of the torch
product ranges
®
4.1 ABIMIG XX0/XX0 T product
range
®
4.2 ABIMIG XX5/XX5 T product
range
®
ABIMIG
4.3 A XX5 GRIP LW
product range
®
4.4 ABIMIG A T XX5 LW product
range
5 Putting into operation
5.1 Setting up the torch
5.2 Mounting the wire guide
5.2.1 Liner
5.2.2 PA liner
5.2.3 Neck-liner
5.3 Connecting the cable assembly EN-13
5.4 Setting the shielding gas volume EN-13
5.5 Feeding in the wire
EN - 2
EN-3 6
EN-3 6.1
EN-3 7
EN-3
EN-3 8
EN-4
9
EN-4
EN-4 10
EN-6
EN-6
EN-6
EN-7
EN-7
EN-7
EN-9
EN-9
EN-10
EN-11
EN-12
EN-12
EN-13
ABIMIG
Operating elements
Trigger function
Operation
Putting out of operation
Maintenance and cleaning EN-16
Disposal
®
XX0/XX5
EN-14
EN-14
EN-14
EN-15
EN-17