Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3 Product description
2.3 Emergency information
3 Product description
3.1 Technical Data
Transport and storage
Relative humidity
Tab. 1
Ambient conditions during operation
Type of voltage
DC polarity of the electrodes
Shielding gas (DIN EN ISO 14175)
Wire types
Voltage rating
Protection type of the machine side connections
(EN 60 529)
Control device in handle
Tab. 2
General torch data according to EN 60 974-7
EN - 4
NOTICE
Describes the risk of impairing work results or potential material damage to
the equipment.
In the event of an emergency, immediately disconnect the following supplies:
• Electrical power supply
• Gas supply
Further measures can be found in the operating instructions for the power
source or the documentation for other peripheral devices.
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and
material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without
authorisation.
• The device may only be used by qualified personnel (in Germany, see
TRBS 1203).
ABIMIG
- 25 °C to + 55 °C
up to 90 % at 20 °C
DC
Usually positive
CO
and mixed gas M21
2
Commercially available round wires
113 V peak value
IP3X
for 42 V and 1 A
®
XX0/XX5
Publicidad
Tabla de contenido
