Forward-Facing Installation With Latch - Graco MY RIDE 70 Manual Del Proprietário

FORWARD-FACING INSTALLATION WITH LATCH

Adjust child restraint to Upright position
1
(fig. a). Flip recline feet out for
forward facing use.
stored. (see fig. b, pg. 39)
2 Place forward-facing
equipped with LATCH
belt to its maximum length.
3
anchors (fig. b). Belt must lay flat and
not be twisted. Pull connectors to be
sure they are securely attached (fig. c).
4
LATCH belt is
anchors.
LATCH
Press down firmly in center of child restraint to
5
LATCH belt by pulling adjustment belt (fig. d).
6
7
and does not slip from the tightened position.
8
hardware (B) and tighten adjustment belt to
Belt must lay flat and not be twisted.
LATCH
18
(fig. e).
(A) to anchor
(fig. f).
LATCH from