Rear-Facing Installation With Latch - Graco MY RIDE 70 Manual Del Proprietário

REAR-FACING INSTALLATION WITH LATCH

Adjust child restraint to recline position
1
(fig. a). Flip recline feet under child
restraint for rear facing use.
stored. (see fig. c, pg. 39)
2 Place rear-facing
with LATCH anchors.
3
to its maximum length.
4
(fig. b). Belt must lay flat and not be
twisted. Pull connectors to be sure they
are securely attached to the anchor points.
(fig. c).
5
while pulling LATCH
6
LATCH belt is
LATCH belt
adjustment belt. (fig. d).
(fig. e).
and does not slip from the tightened position. If
7
Vehicle must
Ball MUST be entirely in green zone (fig. f). If
DO NOT use tether
LATCH
16
(fig. f).
rear-facing
LATCH
must be
from