Drip Profile Creation; Espresso Profile Creation - Bezzera ARCADIA DE BREWING PROFILE Manual De Instrucciones

BEZZERA ARCADIA BREWING PROFILE
MOD.
To create a profile without assigning it to any key
but saving it in the profile list, access the profile
manager
Pressing the NEW PROFILE button will display the
screen where it is possible to select the type of
profile to be created

5.8.1.1 ESPRESSO profile creation

After choosing to create an ESPRESSO profile, the
following screen will appear on the display
By entering the total quantity of water to be used
for preparation of the ESPRESSO beverage, three
different profiles are proposed which are pre-set
and can be selected using the keys
REGULAR
ACID
BITTER
These pre-set profiles are the Bezzera options to
obtain different characteristics from your favourite
coffee.
It is possible to customise the dosing profile by
pressing the CUSTOM key. In this mode all the
extraction parameters can be changed.
Select the first sector of the graph to modify the
pre-infusion parameters (dose and pause time)
Select sectors 2, 3 and 4 to change the dosing
parameters (dose and pressure)
Pressing the RESTORE key restores the profile pa-
rameters before the change starts
By pressing the TEST key it is possible to dose the
profile created
Pressing the SAVE key will display a keyboard to
assign a name to the profile created (maximum 8
alphanumeric characters) and to save it.

5.8.1.2 DRIP profile creation

After choosing to create a DRIP profile, the fol-
lowing screen will appear on the display
By entering the total quantity of water to be used
for DRIP beverage preparation, a pre-set REGU-
LAR profile is proposed. It is possible to customise
the dosing profile by pressing the CUSTOM key.
In this mode all the extraction parameters can be
changed. Select one of the four available sectors
to modify the extraction parameters (dose and
pause time).
Pressing the RESTORE key restores the profile pa-
rameters before the change starts.
By pressing the TEST key it is possible to dose the
profile created
Pressing the SAVE key will display a keyboard to
assign a name to the profile created (maximum 8
alphanumeric characters) and to save it.
50