Group Adjustment; Group Temperature Adjustment; Groups Chrono Activation; Group Washing - Bezzera ARCADIA DE BREWING PROFILE Manual De Instrucciones

BEZZERA ARCADIA BREWING PROFILE
MOD.
3) Put the omnipolar power switch in idle position "0".
4) Release the pressure from the steam tap.

5.7 Group adjustment

From the main menu
when or
the display will show the following screen:

5.7.1 Group TEMPERATURE adjustment

It is possible to activate/deactivate heating for
the group currently selected by pressing
until "ON" or "OFF" appears on the screen, and
four different temperatures can be set:
green from 88°C (190°F) +/- 2°C (3.6°F)
yellow from 90°C (194°F) +/- 2°C (3.6°F)
orange from 92°C (198°F) +/- 2°C (3.6°F)
red from 94°C (201°F) +/- 2°C (3.6°F)
by touching the part of the display showing the
four coloured sectors

5.7.2 Groups CHRONO Activation

By pressing
pears, it is possible to activate/deactivate the dosing
time displayed in seconds in the following screen:
or
until "OFF" or "ON" ap-

5.7.3 Group washing

It is possible to wash the selected group by press-
.
ing
This procedure must only be performed after assem-
bling the filter holder with the supplied blind filter.
The display will show the following menu:
Press to execute a normal wash (5 consec-
utive outputs, approximately 10 seconds each).
Press to execute an intense wash (10 con-
secutive outputs, approximately 10 seconds each).
Press to return to the previous menu.

5.7.4 Groups COUNTER display

It is possible to view the number of outputs ex-
ecuted by pressing
the display will show the following menu:
48