MSA Cairns Serie Manual De Uso página 26

(12)
(13)
US
(15)
(16)
(17)
26
Use an 11/ 64-in. (4.4-mm) drill bit to widen the pilot holes..
Install the black impact cap.
Install plugs in the empty holes. Contact MSA Customer Service at 1-877-MSA-FIRE for addi-
tional information.
If applicable, use a Phillips-head screwdriver to install the goggle clips or faceshield brackets,
then install the goggles and/or faceshield.
Install the ear cover.
(11) Remove the black impact cap.
(14) Do the following on the left and right sides of the fire
helmet:
a) Install the MSA nameplate with the MSA logo
facing outward, and hold it in position.
b) Install the bracket, and hold it in position.
c) Install the cap nut in the bracket. If the cap nut is
seated properly, the bracket acts as a socket.
d) Use a Phillips-head screwdriver to install the
screws through the nameplate, shell, and bracket
into the cap nuts. Do not overtighten or strip the
screws.
MSA Cairns Fire Helmets