After Treatment - Silk’n Tightra Manual Del Usuario

6. If after 5 minutes you feel comfortable with the heat, move
to energy level 2 by short pressing the control button
(#3). To use energy level 3 (high), short press the control
button (#3) one more time.
EN
If the energy level is right for you but it feels too hot now
Z
and again, increase the area you are treating and/or keep
moving the device around the treatment area.
If you find it difficult to move the device across the skin,
Z
you may apply another small amount of gel on the 3 silver-
coloured electrodes (#6, #7).
7. Continue to glide the device across the labia. After 20
minutes the device will shutdown.
In cases of pain or discomfort: remove the device, and wait
Z
until you feel OK before using the device again.
8. At the end of the treatment, remove the device, and wipe
the external skin around the vagina with a clean dry towel,
or wipes specifically for the vaginal area, to remove any gel
residue.
9. Clean the device (see section 7. Cleaning, maintenance &
storage).

6.4 After treatment

After internal or external mode treatments, we recommend
that you:
avoid very hot water for 2 days after the treatment.
U
contact your physician if there is any indication of infection,
U
excessive swelling, redness, pain, or any other unusual
symptom.
18