Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Warning! Iron and soleplate may still be very hot. Exercise care
while wiping.
- Place iron on heel and leave to cool.
Before using iron after self cleaning, test steam and burst of
steam on an old towel or cloth than can be discarded.
Vapodur Valve
To ensure the iron continues to steam effciently, open and close
the valve a few times after each use. This is done by moving the
variable steam control lever left to right a few times.
After Ironing
- Unplug the iron. Slide the variable steam control completely
to the left (the minimum position) and empty any water
left in the tank. Leave the iron to cool down.
Cleaning and Maintenance
When cold and unplugged, the iron can be cleaned with a
damp cloth and wiped dry.
Never use household cleaners or solvents.
Cleaning the soleplate
Rowenta soleplates have excellent non-stick properties and can
be wiped clean when cold.
- In normal use a draggy coating may build up on the soleplate
(starch, detergent build-up, burnt synthetic fibers).
This can easily removed by using the Rowenta Soleplate Kit
or a quality hot iron soleplate cleaner available at most
stores. The Rowenta kit is also available through our website:
www.rowentausa.com.
- To prevent scratching of the soleplate, do not iron over sharp
objects (zippers, etc.). Do not place the iron on rough surfaces,
e.g. metal iron support, which may scratch the soleplate.
Cord reel
- Hold end of cord at plug to slowly
guide cord back into reel.
Press cord reel button to retract
cord for storage.
- To protect the soleplate alwaysstore the iron
on its heel.
Important:
Always empty the water tank
when you have finished ironing.
Publicidad
Tabla de contenido
