English - Maintenance Manual; Introduction - Munters ED36HE Manual De Mantenimiento

ENGLISH - MAINTENANCE MANUAL

1. Introduction

ATTENTION Pictures included in this manual refer to products for which maintenance/replacement has to be
done by following the same routine.
Maintenance must only be carried out by qualified personnel only using suitable tools and working methods.
It is mandatory to purchase and use only original spare parts or those recommended by the manufacturer. The use of
non-original spare parts or incorrect assembly exonerates the manufacturer from all liability.
Before any maintenance steps are taken, make sure the power switch is in the off position and locked by a padlock.
Make sure the propeller is at a complete standstill.
WARNING
The capacitor in single-phase motors can retain a charge which appears across the motor
terminals even when the motor has reached standstill.
Fans do not contain parts needing periodic lubrication, as moving parts are either manufactured from self-lubricating
materials, or are sealed with lifetime lubrication.
1.1 Routine Maintenance Program
Following the maintenance program prepared by our experts is the best way to ensure the smooth operation of Munters
fans, to improve their performance and to give a longer lifespan.
BELT TENSIONING*
CLEAR DUST**
BELT
CENTRAL PULLEY
CENTRIFUGAL SYSTEM
PLASTIC BEARING
* Tighten belt for the first time after fan has been running for 3 days.
** No high-pressure water to be sprayed on motors and bearings.
ROUTINE MAINTENANCE
1 MONTH 2 MONTHS


4 | © Munters AB, 2018
2 YEARS 4 YEARS


5 YEARS

