Wear Parts; Troubleshooting - Oase BioSmart 5000 Instrucciones De Uso

Ocultar thumbs Ver también para BioSmart 5000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

-
English
-
Storage/Over-wintering
− Put the unit out of operation at water temperatures below 46 °F (8 °C) or, at the latest, when freezing temperatures
are to be expected.
− Drain and thoroughly clean the unit, check for damage.
− Remove, clean, dry and store all filters in a frost-free environment.
− Ensure that the storage place is inaccessible to children.
− Cover the filter container such that the ingress of rain water is excluded.
− Drain all hoses, pipes and connections as far as possible.

Wear parts

Foam filters are wear parts and are excluded from the warranty.
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided.
Disable the unit beforehand by cutting off the cables.
Malfunctions
Trouble shooting
Water stays cloudy
6
23864-09-13_GA_BioSmart 5000-1006 6
Cause
- Unit has been in operation only for a short time
- Inadequate pump capacity
- Water extremely soiled
- Excessive fish and animial population
- Foam filters soiled
Remedy
- The complete biological cleaning effect is only achieved
after several weeks
- Readjust the pump capacity
- Remove algae and leaves from the pond, perform a
partial water change
- Guide value: approx. 2 ft (60 cm) fish length on 1 m³
pond
water
- Clean foam filters
13.09.2013 12:49:18

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Biosmart 10000

Tabla de contenido