Vacuum Shoe Maintenance; Spray Nozzle Maintenance; Power Brush Maintenance - Nilfisk Advance AquaPLUS Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A-18 / ENGLISH

VACUUM SHOE MAINTENANCE

Check the vacuum shoe daily. Remove any built-up string, hair or carpet fi bers. To remove:
1
Press the Scrub OFF Switch (H). Turn the master Key Switch (A) OFF.
2
Remove the Debris Hopper (29).
3
The left side shoe must be removed fi rst to allow clearance for the right side shoe to slide out.
4
See Figure 5. Disconnect the Vacuum Hose (33) from the Vacuum Shoe (10).
5
Pull up on the Ring (34) and hold up while pulling the shoe forward and then out of the machine.
6
Repeat steps 4 and 5 for the right side vacuum shoe.
7
Follow steps in reverse order to reassemble.

SPRAY NOZZLE MAINTENANCE

Remove the spray nozzles once a week. Soak the nozzles overnight in a vinegar and water solution to remove chemical deposits.

POWER BRUSH MAINTENANCE

Check the brushes daily. Remove any built-up string, hair or carpet fi bers. Check the bristle length. Have a service technician change the brush
when the brush bristles are worn to 1/2 inch (13 mm).
A-18 - 56041677 - AquaPLUS
FIGURE 5
, AquaPLUS AXP

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Advance aquaplus axp

Tabla de contenido