Technical Data, Lsi - SICK LSI 101 Manual Del Usuario

GB

10. Technical Data, LSI

Specifications
Supply voltage (Uv)
Protected against polarity
reversal by isolating transformer
to EN 60742
Permissible residual ripple
The lower and upper supply
voltage limits must not be
infringed.
Cable length
Cable cross-section
Permissible line impedance
Response time (adjustable)
Double speed
Formula for scan rate
(n = 2 to 16)
Exception: PLS101-316 with
LSI in vehicle protection; here
the response time is 270 ms,
non-adjustable
Power-up time
On power-on
Power consumption
without PLS and no load
with 1 PLS and max. load
with 2 PLS and max. load
with 3 PLS and max. load
with 4 PLS and max. load
PLS connection
152
© SICK AG · Industrial Safety Systems · Germany · All rights reserved
min.
16.8 V
110 ms + ( n x 40 ms )
See PLS technical data.
Connect only PLS units of same
8 008 308/M848/06-05-02 Operating Instructions · LSI
LSI
Data
typ. max.
24 V 28.8
500 mV
50 m
2.5 mm
2.5 Ohm
190 ms
9 sec.
15 W
63 W
80 W
97 W
114 W
type.
2