Non-Contact Ac Voltage Measurements - Beta 1760PA/80 Manual De Instrucciones

NON-CONTACT AC VOLTAgE MEAsuREMENTs

WARNING: Risk of Electrocution. Before use, always test the Voltage Detector on a known
live circuit to verify proper operation
1 Touch the probe tip to the hot conductor or insert into the hot side of the electrical outlet.
2 If AC voltage is present, the detector light will illuminate.
NOTE:
The conductors in electrical cord sets are often twisted. For best results, rub the probe tip along a
length of the cord to assure placing the tip in close proximity to the live conductor.
NOTE:
The detector is designed with high sensitivity. Static electricity or other sources of energy may
randomly trip the sensor. This is normal operation
Beta 1760 PA_80 Manuale.indd 18
18
19/05/14 14:51