Accessories; Cautions On Use - Starrett PKG08762 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22

ACCESSORIES

PART NO.
EDP
PT22429
72441
PT11770A
71361
PT22428
72440
PT22430
72442
PT27171
66457
PT99454
68713

CAUTIONS ON USE

1.
Do not store this instrument in areas of extreme temperature - below 10°F (-12°C)
or above 130°F (54°C).
2.
For best results, operate the height gage in an area free from dust and sprays of
cutting oils, other coolants and liquids.
3.
This is a precision instrument and extreme care should be taken to avoid bumping
or dropping the gage.
4.
The height gage has been calibrated at 68°F (20°C). Avoid using the gage in
direct sunlight or in a draft of hot or cold air. For best results, use in a constant
temperature situation and allow time for the gage to soak at temperature for at
least one hour when transferring the tool from a temperature difference of more
than 10°F(6°C).
5.
Clean the height gage vertical bar using a clean, lint-free cloth. Apply a very light coat of
lubricant. Use one or two drops of instrument oil on a finger and wipe over the vertical bar.
Move slide up and down and wipe off the excess oil.
6.
Avoid any disassembly or modification of the gage, which will void all warranties.
7.
Avoid using anything that might damage the buttons while pressing them.
NAME
Dovetail Body
Clamp
Tool Post Holder
Swivel Post Snug
with Dovetail
Indicator Clamp
Snug and Rod Unit
Metric Snug and
Rod Unit
Indicator
Attachment
DESCRIPTION
3/16" (4.8mm) diameter rod. For
use with surface gage snugs
1/4" x 1 5/6" (6.3 x 33mm)
post and 1/4" x 1/2" (6.3 x
12.7mm) shank
This snug will fit over spindles
and posts
3/32"-1/4" (2.4-6.3mm)
This unit consists of a snug
(PT18724)
and
(100mm) rods. One 1/4"
(6.3mm) diameter, the other a
3/8" (9.5mm) diameter.
This unit consists of a snug
and two 4" (100mm) rods. One
.236" (6mm) diameter, the other
a .315" (8mm) diameter.
This dovetail clamp replaces
the standard scriber. See page
18 for a detailed de-scription
of the setup and use of this
attachment with your gage.
PKG08762-UM3754
ENGLISH
3D FILE
PICTURE
two
4"
19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Um3754

Tabla de contenido