12.
Install the Towel Bar
Washer
Rondelle
Arandela
Towel Bar
Porte-serviettes
Toallero de barra
Insert a 5/64" hex wrench into hole in screw
head and turn clockwise to secure towel bar.
Insérer une petite clé hexagonale de 5/64"
dans l'orifice de la tête de la vis et tourner
vers la droite pour sécuriser le porte-
serviettes.
Introduzca una llave hexagonal de 5/64" en el
orificio de la cabeza del tornillo y gire hacia la
derecha para fijar el toallero.
Place a clear washer, with the shoulder of the washer toward the glass, onto each
1/4 x 20 screw.
From the inside side of the outside panel, insert a screw into each mounting hole
in the panel.
Slide a washer over the screw on the outside of the panel.
Position the towel bar over the screw and finger tighten the screw.
Insert the second screw into the door panel, slide a washer over the screw, align
the second end of the towel bar, and finger tighten the screw.
Insert a 5/64" hex wrench into the side hole in each screw head. Turn each screw
clockwise to tighten. Do not overtighten or the glass may be damaged.
Repeat the procedures for the inside panel towel bar.
Sterling
1/4 x 20 Screw
Vis 1/4 x 20
Tornillo de 1/4 x 20
Washer
Rondelle
Arandela
23
1063219-2-B