Product Overview; Flow Meter - Hach CL17sc Manual Del Usuario

Ocultar thumbs Ver también para CL17sc:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 112

2.2 Product overview

Chemical or biological hazards. If this instrument is used to monitor a treatment process
and/or dialysis feed water for which there are regulatory limits and monitoring
requirements related to public health, public safety, food or beverage manufacture or
processing, it is the responsibility of the user of this instrument to know and abide by any
applicable regulation and to have sufficient and appropriate mechanisms in place for
compliance with applicable regulations in the event of malfunction of the instrument.
The CL17sc analyzer measures the free chlorine or total chlorine concentration in water in the range
of 0.03 to 10 mg/L at 150 second intervals.
Connect the analyzer to an SC Controller for power, operation, data collection, data transmission and
diagnostics. Refer to the SC Controller manual for an overview of the controller.
Note: More than one analyzer can be connected to an SC Controller if the controller has more than one quick-
connect fitting.
Figure 1 CL17sc
1 Indicator bottle
2 Measurement cycle lights
on page 7)
3 Pump clamp
4 Tubing clip

2.2.1 Flow meter

The analyzer has a flow meter that measures the sample flow through the analyzer. Refer to
on page 6.
Sample flows through the analyzer only when the analyzer flushes the cell. At other times, there is no
sample flow and the flow rate shown is zero. Push the RIGHT arrow on the controller to show the
flow rate.
6 English
D A N G E R
Figure 1
5 Analyzer status light
(Table 4
6 Flow meter
7 Buffer bottle
8 Colorimetric cell
gives an overview of the analyzer.
(Table 5
on page 7)
Figure 1

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido