Start Up; Turn On And Off - Truper PUL-4X6T Instructivo

Turn on and off

• The sander has a locking safety switch to prevent
unauthorized use. If you are leaving the machine for a long
period of time and there is the possibility untrained
personnel would use it, especially children, remove the
locking safety key with switch in the OFF position. Leave
the safety key in a secure place, do not misplace it or you
would not be able to operate the sander again.
• To turn on the sander, insert the safety key and move the
switch to the ON position.
• To turn off the sander, move the switch to the OFF
position.
• Make sure the switch is in the OFF
WARNING
position before connecting the sander to the power supply.
Sanding procedures
Surface
sanding
8
ENGLISH
Safety key
Edge
sanding
Curved
edges
sanding

Start Up

OFF Position
Curved
edges
sanding
ON Position