17
Technical Information
Heater Band Installation
Figure 31
Heater Band Installation
Figure 32
The heater band model 969-9317 and 969-9327 can be used to heat
the pump casing when a bakeout is needed.
The heater band is available only for the pump with ConFlat inlet
flange (model 969-8932). It is applied to the upper part of the pump
casing, as shown in the figure, and heats it to a temperature of about
80° C.
The heater band must be mounted such that there is perfect thermal
contact with the pump wall to obtain fast and efficient heating.
278/312
TV 1001 Navigator User Manual / 87-900-945-01 (I)