Objetos Para Ajustes De Red; Objeto Device Level Ring - Festo P.BE-CPX-FB36-ES Manual De Uso

C. Objetos de Ethernet/IP del CPX-FB36
C.2

Objetos para ajustes de red

C.2.1 Objeto Device Level Ring
C-8
Clase de objeto: 71
Instancias: 1
Atr. Acceso Descripción
N.°
1 Get Network Topology:
0: Linear
1: Ring
2 Get Network Status:
0: Normal
1: Ring Fault
2: Unexpected loop detected
3: Partial network fault
4: Rapid fault / restore cycle
10 Get Active Supervisor Address:
– Supervisor IP address
– Supervisor MAC address
12 Get Capability Flags
Bit 0:
Bit 1:
Bit 2 ... 4: reserved. Shall be set to
Bit 5:
Bit 6 ... 31:reserved. Shall be set to
Bits 0 and 1 are mutually exclusive
1) Especificación de EtherNet/IP, capítulo 9-5.4
Tab. C/6: Ajustes de red con objeto Device Level Ring
d
Announce-based
1)
RingNode
Beacon-based
1)
RingNode
zero
Supervisor Capable
zero
Festo P.BE-CPX-FB36-ES es 1309NH Español
Tipo
USINT
USINT
STRUCT of
UDINT
ARRAY of
6 USINT
DWORD