7.12.7 Washing the groupheads
To make washing the delivery units,
press the indicated button.
To start the washing cycle, press
"YES" and proceed as follows:
pour the detergent into the blind filters and at-
tach the portafilters to the groupheads;
press the double espresso button
each grouphead;
the following message appears on the display:
"Grouphead wash in progress. " While the machine
performs the first washing cycle, the leds of but-
tons
(1) and
the machine stops when the first cycle finishes
and only the led of the double espresso buttons
(2)continues flashing; remove the portafil-
ters from the groupheads;
press the double espresso buttons again to pro-
ceed with rinsing
while the machine is rinsing, the leds of buttons
(1) and
(2) flash;
once the rinsing cycle is complete, the machine
is ready for normal use
This procedure simultaneously washes all the groupheads; each
keypad controls its corresponding grouphead.
USER manual
(2) for
(2) flash;
(2) ;
.
1
2
3
4
5
6
63
244
of