Install The Batteries - HP Photosmart M415 Guia De Inicio Rapido

RossRedfordNewmanQSG.fm Page 4 Thursday, January 6, 2005 10:17 AM
2.

Install the Batteries

1. Open the Battery/Memory card door on the side of the
camera by sliding the door toward the bottom of the
camera.
2. Insert the batteries as indicated inside the door.
3. Close the Battery/Memory card door by pushing the
door down and sliding the door toward the top of the
camera until the door latches.
You can expect performance similar to the following from the
different types of AA batteries that work in your camera:
Alkaline
Lithium
NiMH (rechargeable)
If you use NiMH (rechargeable) batteries, be
sure that you fully charge them before using them
in the camera.
4 HP Photosmart M415/M417/M517 Quick Start Guide
50 to 150 shots
300 to 700 shots
150 to 300 shots