UsingTheCombAttachment - Panasonic ES‑RT77 Manual Del Operacion

►Trimmingtheedgeofbeard

Cut your beard gradually
with the power switch facing
opposite side of your skin,
taking care not to cut too
much.

Usingthecombattachment

Note
Apply the oil to the trimmer before and after each use. (See
page 14.)
Failure to apply the oil may cause the following problems due to
rust, wear or burn out.
- The trimmer has become blunt.
- Shorter operating time.
- Louder sound.
Make sure that the shaver is turned off.
1
1
Mountthecomb
attachmenttothemain
bodyuntilitclicks.
• Press and hold the comb
attachment release buttons to
remove.
2
2
Slidethetrimmerhandle
upuntilitclicks.
12
3
3
ES-RT77/ES-RT47
4
4
5
5
Whilepressingand
holdingthetrimming
heightswitchbutton,move
thecombverticallytothe
desiredtrimminglength
(between1mm(1/32˝)and
7mm(9/32˝)).
Trimming
mm 1.0 2.5 4.0 5.5 7.0
height
inch 1/32 3/32 5/32 7/32 9/32
(approx.)
Indicator 1.0 2.5 4.0 5.5 7.0
• Actual hair length will be a little
longer than the height you set.
Lightlypushthecomb
attachmenttoensurethat
ithaslockedintoplace.
Turntheshaveron,bringthecombofthe
combattachmentintocontactwiththeskin,
andcutthebeardbymovingthetrimmerback
againsttheflowofthebeard.