Wilo Stratos PICO-Z Serie Instrucciones De Instalación Y Funcionamiento página 35

°C °C
m³/h m³/h
Hold
°C °C m³/h m³/h
ON
°C °C
m³/h m³/h
Hold
°C °C m³/h m³/h
OFF
Installation and operating instructions Wilo-Stratos PICO-Z
In order to set the minimum flow on the pump, the
number of ascending lines must be multiplied by the
"minimum flow per line".
5.2 Activating thermal disinfection
• Use the operating knob (8) to select the "Thermal dis-
infection" menu and then select ON.
disinfect

The display (7) shows on in the icon and also dsft.
Note: Thermal disinfection takes precedence
over the operating mode.
5.3 Activating key lock
• Use the operating knob (8) to select the "Thermal dis-
infection" menu.
disinfect
• Press the operating knob (8) for 10 seconds.

The display (7) shows Hold and OFF alternately.
• Select the ON setting.
• Press the operating knob.
disinfect

The key lock is activated. Settings cannot be changed
and the pump and power consumption meter cannot
be reset.
Note: The key lock does not activate automati-
cally and cannot be deactivated by switching off the
pump.
5.4 Deactivating key lock
• Use the operating knob (8) to select the "Thermal dis-
infection" menu.
disinfect
• Press the operating knob (8) for 10 seconds.

The display (7) shows Hold and ON alternately.
• Select the OFF setting.
• Press the operating knob.
disinfect

The key lock is deactivated.
35