Other Functions (Menu); Navigating In The Menu; Ahold; Setting Permanent Display Of Weight Value (Hold) - Seca 787 Instrucciones De Uso Y Garantía

5.7 Other functions (menu)

Navigating in the menu

Activating/deactivating the
Autohold function (AHOLd)
Setting permanent display of weight
34 •
Other functions and settings are available in the menu for the measuring
station.
A summary of the menu structure can be found in the section entitled
"Overview":
1. Keep the
The last menu item selected is displayed.
2. Press the 
3. Confirm the selection by pressing the confirm key.
The current setting for the menu item (or a submenu item) is displayed.
4. To change the setting, press the 
setting is displayed.
5. Confirm the setting by pressing the confirm key.
You exit the menu automatically.
If the
Autohold
permanently. It is then no longer necessary to press the 
1. Select the
2. Confirm your selection.
The current setting is displayed.
3. Select the desired setting:
4. Confirm your selection.
You exit the menu automatically.
If the
Autohold
value (HOLd) weight value is displayed permanently. You can set when the display of
weight value is automatically cleared again.
: ➔ "Menu structure (seca 787)" (page 14)
–
seca 787
: ➔ "Menu structure (seca 797)" (page 14)
–
seca 797
NOTE
only: Explanation of the functions under the
seca 797
➔ "Setting up the WiFi connection (seca 797)" (page 26).
key depressed until a menu item is displayed.
Menu
or  key until the desired menu item is displayed.
Hold BMI
NOTE
To increase or reduce a numerical value more quickly, you can press
and hold the  or 
Hold
NOTE
• In order to switch to the menu above without changing a setting/to
exit the menu, briefly press the
• If no key is pressed for a few seconds, you exit the menu
automatically.
function is active, the weight value is automatically displayed
NOTE
You can set which action automatically clears the displayed weight
value from the display (➔ "Setting permanent display of weight value
(HOLd)", page 34).
item from the menu.

AHOLd

–
On
–
OFF
function is activated or you have pressed the 
or  key until the desired
Hold BMI
key.
BMI
key.
Menu
Hold
menu item:
rF
key.
key, the
Hold