Taring Off Additional Weight (Tare); Displaying Weight Permanently (Hold) - Seca 787 Instrucciones De Uso Y Garantía

Taring off additional weight (Tare)

Displaying weight permanently
CAUTION!
Incorrect measurement as a result of force shunt
If the patient is in contact with parts other than the weighing platform
during the weight measurement, measuring results will be incorrect.
► Ensure that the patient is in contact only with the weighing platform
during weight measurement.
1. Switch on the measuring station (➔ "Switching on the device", page 28).
2. Ask the patient to step onto the weighing platform:
– Do not touch the measuring rod
– Do not touch the column and the display head
3. Read off the measuring result.
Use the function to prevent an additional weight (e.g. a walking stick)
Tare
affecting the patient's weight value.
CAUTION!
Incorrect measurement as a result of force shunt
If an additional weight is in contact with the surface on which the
device is resting, measuring results will be incorrect.
► Make sure that additional weights are placed only on the weighing
platform.
NOTE
The maximum weight which can be displayed is reduced by the
weight of the objects which have been tared off.
1. Switch on the measuring station (➔ "Switching on the device", page 28).
2. Place the additional weight on the weighing platform.
3. Press the
Tare
The message
4. Wait until the display stops flashing and
NOTE
If you remove the additional weight again,
5. Ask the patient to step onto the weighing platform with the additional
weight (or carrying the additional weight).
The patient's weight is displayed. The additional weight is deducted
automatically.
6. Read off the measuring result.
7. To deactivate the
NOTE
When you switch off the measuring station, the
deactivated automatically.
If you activate the
(Hold)
1. Press the 
The display flashes until a stable weight is measured. The weight value is
displayed permanently. The message
2. Read off the measuring result.
3. To deactivate the
key.
is displayed.
NET
function, press the
Tare
function, the weight value is displayed permanently.
Hold
key.
Hold
function, press the 
Hold
English
is displayed instead.
0.0
will be displayed.
- - - - -
key.
Tare
function is
Tare
is displayed.
HOLD
key.
Hold
Operation • 29