Button Functions; Indicator Leds - Urmet 1750/1 Manual De Instrucciones

Ocultar thumbs Ver también para 1750/1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

BUTTON FUNCTIONS

STATE
STANDING BY
ON-HOOK
BUTTON
Open
pedestrian
door
Scroll video
memory
Auto power-on
Garage door
opener
(*) To enter and exit programming state, hold button pressed for longer than 5 seconds. The yellow LED
will blink slowly to indicate that programming mode is selected. Programming mode will shut down in all
cases after the 10 minute timeout.

INDICATOR LEDS

2. Green LED on.
Indicates that a call is being received
6. Two-colour LED.
PRIORITY
FUNCTIONS
Rapidly blinking red: mute on
1
Green blinking: automatic door opener on

Red on steady: main calling station door open
3
Slowly blinking red: secondary calling station door open

Slowly blinking yellow: programming state on
5
To save programming, remember to hold the button pressed for longer than 5 seconds to quit
programming mode. In any case, after 10 minutes the system exits the programming state and
saves the modified parameters.
Refer to the system booklet for how to program intercom calls.
RESET
To restore default parameters of the device after entering programming mode, hold button
longer than 5 seconds, hold buttons and hold
two long beeps to confirm the command and exit the programming state.
DS1750-003A
RINGING
DURING
ON-HOOK
AUDIO
(RECEIVING
OPERATION
CALL)
Open
Open
pedestrian
pedestrian
door
door
Special
Special
function
function
(default: 7)
(default: 7)
Special
Video
function
switching
(default: 8)
Garage door
Garage door
opener
opener
STANDING BY
OFF-HOOK
Open pedestrian
door
Programmable
intercom call
3 (Default: not
programmed)
Programmable
intercom call
2 (Default: not
programmed)
Programmable
intercom call
1 (Default:
switchboard call)
pressed for longer than 3 seconds. The system will emit
PROGRAMMING
STATE*
(WITH VIDEO DOOR
PHONE STANDING BY
ON-HOOK)
Connect / disconnect the
automatic door opening
system
Adjust door phone and
floor call volume (volume
changes according to
the following sequence:
LOUD, LOW, MUTE)
Floor call ring tone (5
different ring tones)
Door phone call ring tone
(5 different ring tones)
pressed for
7

Publicidad

Tabla de contenido
loading

Tabla de contenido