Dab+ Operation - Roadstar CLR-290D+ Manual De Instrucciones

3 English
FM OPERATION
FM auto tuning: press [Mode/menu] (5) button to select FM mode.
Press and hold [STAT– or +] (7/9) button to scan for FM stations.
Storing stations: you can save 40 DAB stations and 40 FM stations.
Select FM or DAB. Press and hold [PRESET] (4) button.
Press the [STAT– or +] (7/9) buttons to select a preset, then press [SELECT] (8)
button to save the station. The display will show "STORED".

DAB+ OPERATION

Auto tuning: first time, the DAB+ radio will start searching for stations automatically.
Or, while in DAB playing mode, press and hold the [Mode/menu] (5) button, select
"FULL SCAN" and press [SELECT] (8) to confirm;
Manual tuning:
Press and hold the [Mode/menu] (5) button to enter the system menu. Press
•
[STAT +] buttons (7) to select "MANUAL" , [SELECT] (8) to confirm;
Press [STAT– or +] (7/9) buttons to browse between the range of frequencies.
•
Press [SELECT] (8) button to select a station.
DAB+ MENU
1. Press and hold the [Mode/menu] (5) to access the system menu;
2. Adjust radio frequency to your desired station by pressing the [STAT +/-] buttons
(7/9), then press [SELECT] (8) to confirm;
DRC (Dynamic Range Compression): This function reduces the differences
between the loudes and quietest audio being broadcast. It makes quiet sounds com-
paratively louder, and loud sounds comaratively quieter (only if offered by the provi-
der).
In Menu mode, press [STAT– or +] (7/9) to select DRC, then press [SELECT] (8)
•
to confirm;
PRUNE:Removes all invalid stations indicated in the station list with a "?" in front of
the station name.
In Menu mode, press [STAT– or +] (7/9) to select PRUNE>PRUNE Y, then press
•
[SELECT] (8) to confirm;
SYSTEM
Press and hold [MODE/MENU] (5) button to go back in the menus at any time.
Backlight:
•
Press [STAT– or +] (7/9) to navigate the setting options for Backlight; Ti-
meout>Level
• Press the [STAT– or +] (7/9) button to choose brightness level from 1 to 5. Press
[SELECT] (8) to confirm. You can press Dimmer +/- (15) at back of the radio.
Reset: reset the radio to factory settings.
Timeout: The radio display has a baklight with an adjustable timeout.
Press [STAT– or +] (7/9) to select duration, and [SELECT] (8) to confirm.
OFF/10/20/30/45/60/90/120/180
SW VER: Software version.