Alarm Setting; Aux In Operation - Roadstar HRA-590D+ Manual De Instrucciones

FACTORY RESET: in SYSTEM SETTINGS,
YES to Factory settings.
CLOCK AND DATE SETTING
When the radio is ON:
1. Press and hold [Menu] (3) to access to the menu;
2. Press the [CHANNEL -/+] buttons (5) to select "System SETTINGS";
3. Confirm with the [SELECT] button (6);
4. Press the [CHANNEL -/+] buttons (5) to select "Set Time/Date";
5. To SET Time/Date
6. Press the [CHANNEL -/+] buttons (5) to adjust the hour;
7. Confirm with the [SELECT] button (6);
8. Press the [CHANNEL -/+] buttons (5) to adjust the minutes;
9. Confirm with the [SELECT] button (6);
10. Press the [CHANNEL -/+] buttons (5) to set Date;
11. Confirm with the [SELECT] button (6);
Set 12/24 Hour: Press the [CHANNEL -/+] buttons (5) to set 12 or 24hour;
Confirm with the [SELECT] button (6);
Set Date format: Press the [CHANNEL -/+] buttons (5) to set DD-MM-YYYY or MM-
DD-YYYY. Confirm with the [SELECT] button (6);
Auto Update: you can choose radio can update Date/time.
1. Press the [CHANNEL -/+] buttons (5) to select From Any/DAB/FM or no update;
2. Confirm with the [SELECT] button (6);

ALARM SETTING

When the radio is ON:
1. Press and hold [MENU] (3) to access to the menu;
2. Press the [CHANNEL -/+] buttons (5) to select "System SETTINGS", Alarm;
3. Confirm with the [SELECT] button (6);
1. Select Alarm 1 or 2 pressing [CHANNEL -/+] buttons (5) , Confirm with the
[SELECT] button (6);
2. You navigate in this menu with [CHANNEL -/+] buttons (5) , Confirm with the
[SELECT] button (6);
Select Alarm ON, , Frequency of alarm (daily, once etc), Wake up time, Source
(Buzzer/DAB/FM), Volume setting, Duration (15/30/45 etc).

AUX IN OPERATION

1. Select "AUX" mode by pressing the [MODE] (2)button;
2. Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the AUX-IN socket (11).
Note: Music control (play, pause, etc) must be done from your external device.
English
select with [CHANNEL -/+] button (5)
4