System Settings - Roadstar TRA-300D+ Manual De Instrucciones

3 English
To perform FULL SCAN, press and hold [INFO/MENU] (4) button for 2 seconds.
When the Full Scan option appears press [ENTER] (7) button
INFO
When the radio station is playing, press the [INFO] button (3) repeatedly to cycle through the
information broadcasted by the radio as follow:
UNDER DAB
•
DLS (Dynamic Label Segmenting): Radio text broadcasted from the DAB station such
as the news, songs being played...etc.
•
PTY (Programme Type): shows which type of programme you are listening to, "Music",
"Talk", "News" etc.
•
Channel/Frequency: The frequency of DAB is displayed such as "11C 220.352MHz".
•
Audio info: The display shows the digital audio bit rate of the current reception.
•
Signal error: The signal strength is displayed graphically.
•
Time/Date: The time and date are set automatically.
UNDER FM
•
RT (Radio text): Text broadcasted from the FM station
•
Program type: shows which type of programme you are listening to.
•
Time/Date: The time and date are set automatically.
•
Frequency: the FM frequency for the radio station in playing.
•
Mono / Stereo: Automatic switching between mono and stereo reception.
Note: Time and date accuracy depends on the info broadcasted from the radio station.

SYSTEM SETTINGS

In FM / DAB mode there is an option menu.
1. Press and hold [INFO/MENU] (4) for 2 seconds to access to the options.
2. When the FULL SCAN option appears press [◄►] (8) buttons and find DRC or
PRUNE, press [ENTER] (7) button.
DRC (Dynamic Range Compression): This function reduces the differences between the
loudes and quietest audio being broadcast. It makes quiet sounds comparatively louder, and
loud sounds comparative quieter (only if offered by the provider).
PRUNE:Removes all invalid stations indicated in the station list with a "?" in front of the sta-
tion name.
FACTORY RESET: Press and hold [INFO/MENU] button (4) for 2 seconds.
Enter in SYSTEM, FACTORY RESET and choose YES, press [ENTER] (7) button.
The software will return to default settings.
BACKLIGHT: select with
select with press [◄►] (8) buttons following info:
TIMEOUT: you can choose : ON/10/20 etc.
•
LANGUAGE: in SYSTEM SETTINGS,
•
CLOCK AND DATE SETTING
When the radio is ON:
1. Press and hold [INFO/MENU] (4) to access to the menu;
2. Use the [◄►] (8) buttons to select "System";
press [◄►] (8) buttons BACKLIGHT, press [ENTER] (7) to enter,
select with [◄►] (8) buttons desired language