Sleep Timer; Alarm Setting - Roadstar TRA-300D+ Manual De Instrucciones

3. Confirm with the [ENTER] (7) ;
4. Use the [◄►] (8) to select "Time";
5. Confirm with the [ENTER] (7) ;;
6. Use the [◄►] (8) to select "Set Time/Date";
7. Confirm with the [ENTER] (7) ;
8. Use the [◄►] (8) to adjust the hour;
9. Confirm with the [ENTER] (7) ;
10. Use the [◄►] (8) to adjust the minutes;
11. Confirm with the [ENTER] (7) ;
12. Repeat steps 10 and 11 to set the date.
You can choose auto update: Use the [◄►] (8) buttons in INFO/MENU, and select UP-
DATE FROM ANY,UPDATE FROM DAB, UPDATE FROM FM or NO UPDATE.

SLEEP TIMER

The sleep timer switches the radio off automatically after an adjustable time.
When the radio is ON press repeatedly the [SLEEP] (12) to choose the desired timer.
Note: To remove the sleep timer select "Sleep OFF"

ALARM SETTING

When the radio is ON:
1. Press repeatedly the [INFO/MENU] button (4) for 2 seconds.
2. Press [◄►] (8) and find SYSTEM, press [ENTER] (7) button;
3. Press [◄►] (8) and find ALARM, press [ENTER] (7) button;
4. ALARM 1 SETUP will appear on the display.
5. Press [◄►] (8) , to choose ALARM 1 or ALARM 2. Press [ENTER] (7) to confirm.
6. Press [◄►] (8) to choose ON or OFF, then press [ENTER] (7) to confirm.
7. Once ALARM ON is set, Press [◄►] (8) and [ENTER] (7) to set hours and minutes.
8. Press [◄►] (8) to choose duration 15/30/45//60/90/120 and press [ENTER] (7) button
to confirm.
9. Choose BUZZER, DAB or FM with [◄►] (8) and find ALARM, press [ENTER] (7) but-
ton;
10. Select WEEKDAYS, DAILY, ONCE or WEEKENDS with [◄►] (8), press [ENTER] (7)
button;
11. Select desired VOLUME level and press [ENTER] (7) button;
12. Once all settings are done, "ALARM SAVED " will appear on display.
13. To disable ALARM, repeat step 1-6 and choose OFF;
English 4