Symbols; Cleaning The Main Unit - Ca-Mi NEW HOSPIVAC 400 Manual De Instrucciones

To clean the device external parts always use a cotton cloth dampened with detergent. Don't use abrasive or solvent detergents.
ATTENTION: During cleaning make sure that liquids do not come into contact with the membrane keyboard (only in versions with
footswitch and flux deviator) and adjacent areas as this would damage the component, with possible infiltration of the liquid inside
the device.
The symbol positioned in the casing near the membrane keyboard requires the reading of the user instructions before
each use.
PARTICULAR CARE SHOULD BE TAKEN TO ENSURE THAT THE INTERNAL PARTS OF THE EQUIPMENT DO NOT
GET IN TOUCH WITH LIQUIDS. NEVER USE LIQUIDS (e.g. DETERGENTS AND/OR SANITISING SUBSTANCES) TO
CLEAN THE MAIN UNIT (ESPECIALLY NEAR THE MEMBRANE KEYBOARD) AS THEY MAY PENETRATE INSIDE THE
DEVICE
During all clearing operations use protection gloves and apron (if need be, also wear a face mask and glasses) to avoid getting in
contact with contaminating substances (after each utilization cycle of the machine).
Hz
(---)
(
IPX1
(on the footswitch control label)
Please note technical specifications may vary upon the manufacturer's discretion!
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2012/19/UE-WEEE:
The symbol on the device indicates the separated collection of electric and electronic equipment. At the end of life of
the device, don't dispose it as mixed solid municipal waste, but dispose it referring to a specific collection centre
located in your area or returning it to the distributor, when buying a new device of the sample type to be used with the
same functions. This procedure of separated collection of electric and electronic devices is carried out forecasting a European
environmental policy aiming at safeguarding, protecting and improving environment quality, as well as avoiding potential effects on
human health due to the presence of hazardous substances in such equipment or to an improper use of the same or of parts of the
same Caution: The wrong disposal of electric and electronic equipment may involve sanctions.

CLEANING THE MAIN UNIT

~
)

SYMBOLS

Class II isolation equipment
CE marking in conformity with EC directive 93/42/EEC and subsequent
CA-MI Srl - Via Ugo La Malfa nr.13 – Frazione Pilastro
43013 Langhirano (PR) Italy
General warnings and/or specifications
Consult the instruction manual before each use
To Preserve in place coolness and dry land
Conservation temperature: -40 ÷ 70°C
Applied Part type B (suction probe / conical fittings)
Using the footswitch control (for intermittence suction)
Using the footswitch control (for continuous suction)
Degree of protection an electrical device provides in the case of accidental
or intentional contact with the human body or with objects, and
protection in the case of contact with water.
1st DIGIT
PENETRATION OF SOLIDS
No protection
15
changes
Fuse
Alternate Current
Mains Frequency
ON / OFF
2nd DIGIT
PENETRATION OF LIQUIDS
Protected against the vertical flow
of drops of water
GB