Motorola TETRA MTP850 Guía Del Usuario Básico página 23

Status Icon
Direct Mode Operation (DMO)
Signal Strength
Indicates an incoming Direct Mode Group Call.
Direct Mode
Displayed when the MTP850 is in Direct Mode.
DMO Gateway
Indicates that gateway is selected. The icon has three states:
Solid – while the MTP850 is synchronised with the gateway.
Flashing – while the MTP850 is not synchronised or during
attachment.
No icon – during a terminal to terminal and repeater call.
DMO Repeater
Displayed when the repeater option in DMO is selected. This
icon has three states:
Solid – while the terminal has detected the repeater (i.e., when
the terminal receives a presence signal).
Blinking – while the terminal has not detected the repeater or
during attachment.
No icon – during a terminal to terminal and gateway call.
General Icons
All Tones Off / Duplex & Simplex Ring Muted
Indicates that all alert tones are off in the MTP850 or both
Simplex Ring volume is set to 0 and Duplex Ring volume is set
to 0.
Simplex Ring Muted
Indicates that Simplex Ring volume is set to 0 and Duplex Ring
volume is set to more then 0.
Duplex Ring Muted
Indicates that Duplex Ring volume is set to 0 and Simplex Ring
volume is set to more then 0.
Vibrate On
Indicates that the MTP850 will vibrate to alert you of an
incoming call.
Vibrate then Ring
Indicates that the MTP850 will vibrate then ring to alert you of
an incoming call.
Description
21