pico Technology PicoScope USB Guía Rápida De Inicio página 7

Quick Start Guide
1.6 Installing the PicoScope software
1. Insert the Pico software disc into your CD drive. It should start automatically.
If it does not, simply go to My Computer (or This PC for Windows 8) and
run the Pico CD. Alternatively, the software can also be downloaded from
www.picotech.com/software.
2. Select the appropriate language.
3. Follow the on-screen instructions to install the PicoScope software.
4. If your oscilloscope is mains powered, connect the power cord to the
power adaptor, and plug it into a mains power socket. Then connect the
DC power cord to the back of the oscilloscope, and switch on the mains power.
5. Connect the oscilloscope to your PC using the USB cable supplied. See the USB
setup section (1.5) and the connection diagram below for more information.
Windows may automatically display a New Hardware Found notification.
6.
Follow any instructions shown. Note: If Windows asks to connect to
Windows Update, select No.
Select PicoScope 6 from the Windows Start menu.
7.
8. If your oscilloscope requires a probe, connect one to channel A first. Touching
the tip of the probe should result in a small 50 Hz or 60 Hz signal showing in
the PicoScope window.
do115-17
1. PicoScope PC 3. Pico Technology
Oscilloscope USB cable
2. Oscilloscope 4. PC
USB port 5. PC USB port
6. Power adaptor
(if applicable)
Copyright © 2006-2014 Pico Technology Ltd. All rights reserved.
1.7 Free newsletter
Pico Technology sends out a free monthly newsletter by email. This gives news of
product launches, software upgrades and application notes, as well as hints and
advice. We treat your email details as confidential and will not pass them on to any
third parties. To subscribe visit:
www.picotech.com/newsletter
1.8 Software updates and replacement
The latest versions of all Pico software can be downloaded free of charge at:
www.picotech.com/software
If you require a new software disc, please contact Pico Technology or your
distributor. There may be a small charge for this service.
1.9 User's guides
All User's Guides are available on the software disc, or can be downloaded from:
www.picotech.com/document
1.10 Writing your own software
The software disc contains all of the manuals and drivers you will need to develop
your own custom programs easily.
1.11 Input connections
The product manual installed with the software contains complete descriptions of
input connections. Follow section 1.6 to install the software and the manual.
1.12 Specifications
The User's Guide and Data Sheet contain the latest specifications for your
PicoScope PC oscilloscope. We recommend that you print a copy of the specification
table and keep it for easy reference.
1.13 Technical support
Regularly updated technical support information can be found at the Pico
Technology technical support website and users' forum here:
www.picotech.com/support
1.14 Warranty and returns
These PicoScopes are supplied with a 5 year return-to-manufacturer
warranty. For full terms and conditions, see the product User's Guide.
picoScope uSb oscilloscope
4