Festo DNCE LAS Serie Instrucciones De Utilizacion página 27

DNCE−...−LAS
Note
Improper handling can result in malfunctions.
S Make sure that the specifications in this chapter are always observed.
Only in this way will the product function correctly and safely.
Compare the maximum values specified in these operating instructions with
S
those of your actual application (e.g. forces, torques, temperatures, masses,
speeds).
Operation of the product in compliance with the relevant safety regulations is
contingent on adherence to the load limits.
Take into consideration the ambient conditions at the location of use.
S
Corrosive elements in the environment (e. g. ozone) will reduce the service life
of the product.
Please comply with national and local safety laws and regulations.
S
Remove transport packaging such as foils and cardboard.
S
The packing is intended for recycling (except for: oiled paper = other waste).
Unauthorised product modification is not permitted.
S
Note the warnings and instructions on the product and in the relevant
S
operating instructions.
Take the tolerance of the tightening torques into consideration. Without
S
special specification the tolerance is ±20 %.
Fitting in a vertical or sloping position
Make sure that the piston rod has reached a stable position when the
S
operating voltage is switched off or if there is a power failure (e. g. the lowest
point or secure it with moveable bolts, e. g. cylinder).
Festo DNCE−...−LAS 1003b English
27