Installing Circuitry - Festo DNCE LAS Serie Instrucciones De Utilizacion

DNCE−...−LAS
Measuring system, measuring tape division, interpolation
The distance between two index lines (= north or south pole of the magnetic
displacement encoder) is 5 mm. That equals 2048d (800h) increments. The
increments are calculated by means of interpolation.
This results in the following conversions (all figures are decimal):
[Inc] è [mm]
[mm] è [Inc]

Installing circuitry

Note
If used in safety−relevant applications, additional measures are necessary.
In Europe, for example, the standards in the EC machinery directive must be
observed.
Without additional measures in accordance with statutory minimum require
ments, the product is not suitable for use in safety−related sections of control
systems.
Festo DNCE−...−LAS 1003b English
x Inc
mm +
5 mm
2048 Inc
Inc + x mm
2048 Inc
5 mm
33