Combustion Head Setting - Riello RL 190/M Instrucciones De Instalación, Funcionamiento Y Mantenimiento

Installation
5.8

Combustion head setting

The setting of the combustion head depends exclusively on the
maximum burner delivery at which it will be operating.
Turn screw 4) (Fig. 13) until the notch shown in diagram (Fig. 14)
is level with the front surface of flange 5) (Fig. 13).
Example:
RL 190/M, maximum light oil delivery = 150 kg/h
Diagram (Fig. 14) indicates that for a delivery of 150 kg/h the
RL 190/M Model requires the combustion head to be set to ap-
prox. three notches, as shown in (Fig. 13)
Fig. 13
D462
Notches no.
D1985
Light oil delivery in 2nd stage kg/h
Fig. 14
13 GB 20024198